The Drain Pump series are all pre-assembled packaged pumping stations for use in areas where gravity flow is not available. They are used for various drainage applications, with the 912 series also used for the transfer of sewage or waste water, all specially designed for easy installation.

All our pumping stations comply to BS EN 12050-1:2001 / BS EN 752-6:1998 standards.

A Siren Alarm is recommended to ensure that there is no excess build up in the event of a pump failure.

*For Additional Information please see the PDF link*

912pdf 900pdf 105pdf INSTALLATIONpdf

The Saniquick A is a compact mini pumping station which is floor mounted for use in sanitary installations. It is used for applications which are below sewer back waste level such as with hand basins, washing machines or showers in basement apartments or cellars.

*For Additional Information please see the PDF link*

SANIQUICKpdf

The Saniflux is a compact lifting station with a built in submersible pump featuring a stainless steel cutter system, intended for sanitary installations comprising a single WC, hand basin, bath or shower in basement areas or below sewer back waste level.

*For Additional Information please see the PDF link*

SANIFLUXpdf

These packaged pumping stations consist of a one piece moulded polyethylene sump suitable for above and below ground applications. Supplied with two 240volt pumps suitable for drainage water and light sewage applications. Automatic operation is standard with the use of an integral floatswitch fitted to the pump.

All our pumping stations comply to BS EN 12050-1:2001 / BS EN 752-6:1998 standards.

A Siren Alarm is recommended to ensure that there is no excess build up in the event of a pump failure.

Also available is a neck extension in order to raise the lid opening up to a higher level.

*For Additional Information please see the PDF link*

VS-400pdf INSTALLATIONdoc

The Sanipower is a sewage disposal unit intented for sanitary installations with toilet, hand basins, washing machines and showers in basements apartments or cellars which are below the sewer level and require the installation of a lifting station. This unit is a very industrial version of the Saniflux and uses a stainless steel cutting system in its submersible pump.

*For Additional Information please see the PDF link*

SANIPOWERpdf

The Compli series are packaged sewage disposal units, specifically designed for the disposal of sewage from single dwellings. For easy access and service these units are installed on the ground of a basement or in an accessible sump.

They come with a ready to connect control unit which is pre-wired with the pump and the level control. Each is constructed from long lasting materials, with rust-proof steel shafts and polyethylene storage tanks.

*For additional information please see the PDF link*

COMPLIpdf

The Sanistar series are compact sewage disposal units, suitable for pumping sewage and waste water from toilets, hand basins, showers and rooms which are below the sewer level. Even if there is a natural fall, if the sewer is flooded, the sewage is unable to drain. In this case, Sanistar will prevent a back up and flooding of the room. They are an ideal solution for new constructions or renovation of old constructions.

They are used for applications in:
- basement rooms or carparks
- sanitary facilities in cellar rooms
- sanitary facilities in restaurants, hotels, cinemas, theatres, shopping centres, schools and hospitals.

*For Additional Information please see the PDF link*

SANISTARpdf