Puddle / Residue Pumps

The Telkas are plastic submersible drainage pumps for tight sump applications. They are designed for heavy duty applications using non-oxidizing, non-rusting materials & stainless steel motor casing.

*For Additional Information please see the PDF link*

TELKApdf

The Q series are slimline clean water submersible centrifugal pumps with an integral floatswitch built into the housing, capable of pumping down to 5mm when used on manual.

The RSD-400 is a submersible residue or puddle drainage pump, used to drain down to very low levels (approx 1mm).

The pump features a stainless steel outer case, motor pack and shaft, and has a cast iron motor lid, pump casing and volute. The bottom plate is also cushioned with rubber to prevent damage to tanks.

It comes fully equipped with a non return valve on the suction of the pump to stop any return of water, and comes with a 1 1/4inch top outlet with 25mm, 19mm and 15mm step adapter hosetail. Comes complete with 10m of power cable.

*For Additional Information please see the PDF link*

RSDpdf

The Ponstar submersible residue pump is suitable for clean water applications. The pump features twin mechanical seals, one carbon and one silicon in a lubricated chamber, and is of a mostly alloy construction. The impeller and volute plate are made from a special rubber to give a longer life than the traditional cast iron.

Designed so that the delivery flange can be altered from the vertical to horizontal position.

*For additional information please see the PDF link*

PXLpdf